Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Roland GK-3 owners to properly answer your question.
View the manual for the Roland GK-3 here, for free. This manual comes under the category Hi-Fi systems and has been rated by 1 people with an average of a 6. This manual is available in the following languages: English. Is your question not listed? The steps for determining the position for attaching the pickup and for checking the height are. Use extra care when drilling. Check the height.
Changes in the string height following installation of the GK-3 pickup may cause the clearance between 5. Remove the backing from the tapes for the strings and the pickup to change, which can the pickup cushion, the pickup result in poorer sensitivity. Page 11 1. The clearance gauge supplied with the GK-3 is 1. Attach the divided pickup to the pickup 6. Adjust the height of the pickup.
The pickup height should be adjusted so that the fig. If the gap is greater than 1 mm 0. Page Attaching With The Holder 5. Furthermore, if the finish on your guitar is less than perfect, you may discover that the finish is So far so good. Now it was time to tackle the hard part: installing the GK pin jack. Roland, in their infinite wisdom, designed the jack to mate with a flat plate — which is supposed to mount on the curved side of a guitar.
Figuring out how to route a flat channel onto a round surface was probably the most difficult part of this gig. I started by taping off and marking where the plate would go:. I eyeballed this one in, and totally nailed it! Now was the super tricky part: routing for the jack plate. After much hand wringing and head scratching, I came up with my solution. I first made a routing template out of clear acrylic, matching the plate exactly.
Next I screwed a couple of boards onto my bench, overhanging off the edge, and attached the template to them. Then I clamped the guitar onto the side of the bench, under the routing template, and very, VERY carefully lined it up to exactly where I wanted the route to be.
I could absolutely, positively not mess this up; it had to be perfect from the get go. Great success! So before I removed the guitar from the router jig, I set up the router to remove as much wood as I could, leaving the outer edge intact.
The rest of the wood would have to come out the old-fashioned way: with a chisel. I had to cut away about 38mm 1. Matching on-the-move designs with supreme playability and heavyweight features, the FP-X series represents a fresh generation of portable pianos. All-in-one song production with authentic Roland sounds and songwriting tools to assist modern music makers at any level.
Roland Global Official Fan Page. Stay up to date with Roland news, artists, promotions, events, and more.
0コメント